Section 700 - Operation
Non-Verified Account Codes
(CPC-A, CPC-AII, and CPC-B Versions prior to 3.1 and 6.0 and higher)
Technical Manuals Online! - http://www.tech-man.com
can assign account codes to clients to facilitate billing and to track call
dates and times, numbers called, and outside line numbers used. This
information is printed for each account on the SMDR record.
In CPC-A and CPC-B Versions prior to 3.1, account codes are not verified.
With CPC-AI1 and with CPC-B Versions 6.0 and higher, account codes may
be verified or non-verified depending on system programming.
Non-verified account codes can beforced or
With voluntary account codes, the user is not forced to enter an account
before making a call. With forced account codes, the user must enter an
before accessing an outside line.
Non-verified accountcodes can be assigned to incoming and outgoing calls.
To assign an account code to an outgoing call, the user enters the account
code before making the call or during the call. To assign an account code to
an incoming call, the user enters the account code during the call.
To enter an Account Code before dialing:
1. Press the
The phone issues intercom dial tone.
"Enter Account ##" appears on the display.
If you are using a Single Line Telephone (SLT) or Digital Single Line
Telephone (DSLT), dial "#7."
3. Enter the Account Code (up to 10 digits).
DBS Manual - Issued 8/l 195.
key, then press "#."
Chapter 2. System Features