Main Motor Assembly - Canon NP-1015 Service Manual

B. MAIN MOTOR ASSEMBLY
1. Removing the Main Motor
1) Remove the rear cover, then remove the
screw and remove the capacitor and
capacitor cover.
4) Unscrew the four screws, then lift the
main motor and remove it from the
front.
@ Mounting screws @ Main
Figure 4-17
motor
0
Screw
@ Capacitor cover
Figure 4-15
2) Disconnect all connectors from the DC
controller PCB, then remove the DC
controller PCB.
3) Disconnect connector J105 from the
AC driver PCB.
@ AC driver PCB
@ Connector (J105)
Figure 4-16
4-6
COPYRIGHT
0
1908 CNWON INC
CANON NP-1015/1215S REV.0 OCT. 1988 PAINlEO IN JAPAN IlMPAlMf IIU JAPON)