Deleting A File - Agilent Technologies PSA Series Getting Started Manual

Highlighting a filename in the To: directory box has no significance. The file
NOTE
cannot be placed inside another file.
7. Press

Deleting a File

1. To access the Delete menu, press
2. Select the type of file you want to delete (setup, state, trace, limits, screens, or
3. Select the drive and directory where the file you wish to delete is located. In
4. Select the file you want to delete. In this example, choose the file
5. Press
Chapter 4
to execute the operation. The message: "Copying file" is
Copy Now
displayed during the copying process. Upon completion, the status bar reads:
"C:\START\RENAME.TRC file copied". You have now copied the file
RENAME from the C: drive to the A: drive.
corrections). In this example, you are deleting a trace file; press
this example, choose C:\START\. Use the navigation keys (
, step keys, front panel knob) to highlight this location in the Path:
Select
field. (Refer to "Locating and viewing files in the catalog" on page 47
instructions.)
RENAME.TRC. Move the cursor with the navigation keys to highlight the file
name.
Delete Now . The message: Deleting file pops up on the display
during the operation. Upon completion, the status bar reads:
C:\START\RENAME.TRC file deleted. Your file is now deleted and is no
longer visible in the directory displayed on your analyzer.
Viewing Catalogs and Saving Files
File , Delete .
Saving a File
Type, Trace .
Dir Up , Dir
for more
59