Deleting A File - Agilent Technologies ESA Series Getting Started Manual

7. Press Copy Now to execute the operation. The message: "Copying file" is displayed during the
copying process. Upon completion, the status bar reads: "C:\START\RENAME.TRC file
copied". You have now copied the file RENAME from the C: drive to the A: drive.

Deleting a File

1. To access the Delete menu, press
2. Select the type of file you want to delete (setup, state, trace, limits, screens, or corrections). In this
example, you are deleting a trace file; press
3. Select the drive and directory where the file you wish to delete is located. In this example, choose
C:\START\. Use the navigation keys (
this location in the Path: field. (Refer to
more instructions.)
4. Select the file you want to delete. In this example, choose the file RENAME.TRC. Move the cursor
with the navigation keys to highlight the file name.
5. Press . The message: Deleting file pops up on the display during the operation.
Delete Now
Upon completion, the status bar reads: C:\START\RENAME.TRC file deleted. Your file is now
deleted and is no longer visible in the directory displayed on your analyzer.
Chapter 4
, .
File Delete
.
Type, Trace
Dir Up , Dir Select
"Locating and viewing files in the
Viewing Catalogs and Saving Files
, step keys, front panel knob) to highlight
catalog" on page 51 for
Saving a File
63