Configure Wireless Ports Health-Check - Extreme Networks ExtremeWare Command Reference Manual

Wireless Commands

configure wireless ports health-check

configure wireless ports [<portlist> | all] health-check [on | off]
Description
Configures whether the health check reset function is on or off for the specified port or ports.
Syntax Description
portlist
all
on
off
Default
On.
Usage Guidelines
This command determines whether the port is reset if the health check timer expires.
Example
The following command configures port 1:18 to use the health check facility:
configure wireless ports 1:18 health-check on
History
This command was first available in ExtremeWare 6.2a and added to the "i" series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
2010
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies all ports.
Indicates that the health check reset function is on. The port should be reset if
the health check timer expires.
Indicates that the health check reset function is off. The port is not reset if the
health check timer expires.
ExtremeWare Software 7.3.0 Command Reference Guide