Show System Internal Udp-Relay Database - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show system internal udp-relay database

To display the configuration details of the UDP relay feature, use the show system internal udp-relay
database command.
show system internal udp-relay database
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Release
7.3(0)D1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the details of the UDP relay feature:
switch# show system internal udp-relay database
UDP Relay enabled : Yes
Relay enabled on the following UDP Ports:
---------------------------------------------------------------
Sr No.
------
1.
2.
3.
4.
5.
6.
7.
-----------------------------------------
Object Groups information:
-------------------------------------------
--------------------------------------------------------
Object-Group Name
No. of Relay Addresses :
Associated Interfaces:
-----------------------------------
---------------------------------------------------------------
Object-Group Name
No. of Relay Addresses :
Associated Interfaces:
UDP-Port
---------------
37
42
49
53
69
137
138
: iHello
3
1 . IP-Addr : 2.6.8.12
2 . IP-Addr : 9.8.7.6
3 . IP-Addr : 2.4.6.8
Vlan800 Subnet-broadcast enabled
: iSmart
1
1 . IP-Addr : 4.5.6.7
Modification
This command was introduced.
Default Port?
----------------------
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Netmask : 255.255.255.255
Netmask : 255.255.255.255
Netmask : 255.255.0.0
Netmask : 255.255.0.0
Cisco Nexus 7000 Series Security Command Reference
show system internal udp-relay database
917