Show Ip Dhcp Snooping Database - Cisco Catalyst 2960 Command Reference Manual

show ip dhcp snooping database

show ip dhcp snooping database
To use this command, the switch must be running the LAN Base image.
Note
Use the show ip dhcp snooping database user EXEC command to display the status of the DHCP
snooping binding database agent.
Syntax Description detail
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.2(25)FX
Examples This is an example of output from the show ip dhcp snooping database command:
Switch> show ip dhcp snooping database
Agent URL :
Write delay Timer : 300 seconds
Abort Timer : 300 seconds
Agent Running : No
Delay Timer Expiry : Not Running
Abort Timer Expiry : Not Running
Last Succeded Time : None
Last Failed Time : None
Last Failed Reason : No failure recorded.
Total Attempts
Successful Transfers :
Successful Reads
Successful Writes
Media Failures
Catalyst 2960 Switch Command Reference
2-364
show ip dhcp snooping database [detail] [ | {begin | exclude | include} expression]
(Optional) Display detailed status and statistics information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
:
:
:
:
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
0 Startup Failures :
0 Failed Transfers :
0 Failed Reads :
0 Failed Writes :
0
0
0
0
0
OL-8604-04