Show Ip Dhcp Snooping Database - Cisco Catalyst 3560-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

show ip dhcp snooping database

Syntax Description
Command Modes
Command History
Examples
OL-21522-02
Downloaded from www.Manualslib.com
Use the show ip dhcp snooping database user EXEC command to display the status of the DHCP
snooping binding database agent.
show ip dhcp snooping database [detail] [ | {begin | exclude | include} expression]
This command is available only if your switch is running the IP services feature set.
detail (Optional) Display detailed status and statistics information.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
User EXEC
Release
12.2(53)SE2
This is an example of output from the show ip dhcp snooping database command:
Switch> show ip dhcp snooping database
Agent URL :
Write delay Timer : 300 seconds
Abort Timer : 300 seconds
Agent Running : No
Delay Timer Expiry : Not Running
Abort Timer Expiry : Not Running
Last Succeded Time : None
Last Failed Time : None
Last Failed Reason : No failure recorded.
Total Attempts :
Successful Transfers :
Successful Reads :
Successful Writes :
Media Failures :
manuals search engine
Modification
This command was introduced.
0 Startup Failures :
0 Failed Transfers :
0 Failed Reads
0 Failed Writes
0
Catalyst 3750-X and 3560-X Switch Command Reference
show ip dhcp snooping database
0
0
: 0
: 0
2-613