Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 1640

zoneset (EXEC mode)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
The zoneset distribute vsan vsan-id command is supported in interop 2 and interop 3 modes—not in
interop 1 mode.
Examples The following example imports the zone set database from the adjacent switch connected through the
VSAN 2 interface.
switch# zoneset import interface fc1/3 vsan 2
The following example exports the zone set database to the adjacent switch connected through VSAN 5.
switch# zoneset export vsan 5
The following example distributes the zone set in VSAN 333.
switch# zoneset distribute vsan 333
Zoneset distribution initiated. check zone status
Related Commands Command
show zone status vsan
show zoneset
Cisco MDS 9000 Family Command Reference
27-26
Description
Displays the distribution status for the specified VSAN.
Displays zone set information.
Chapter 27 Z Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x