Policy-map — Use the policy-map command to access the QoS policy
•
map configuration mode to configure the QoS policy map.
•
Policy Class — Use the class command to access the QoS Policy-class
mode to attach or remove a diffserv class from a policy and to configure
the QoS policy class.
•
Class-Map — This mode consists of class creation/deletion and matching
commands. The class matching commands specify layer 2, layer 3 and
general match criteria. Use the class-map class-map-name commands to
access the QoS Class Map Configuration mode to configure QoS class
maps.
•
Stack — Use the stack command to access the Stack Configuration Mode.
Ethernet — Contains commands to manage Ethernet port configuration.
•
The Global Configuration mode command interface ethernet enters the
Interface Configuration mode to configure an Ethernet interface.
•
Port Channel — Contains commands to configure port-channels, i.e.,
assigning ports to a port-channel. Most of these commands are the same as
the commands in the Ethernet interface mode and are used to manage the
member ports as a single entity. The Global Configuration mode
command interface port-channel is used to enter the Port Channel mode.
•
Tunnel — Contains commands to manage tunnel interfaces. The Global
Configuration mode command interface tunnel enters the Tunnel
Configuration mode to configure an tunnel type interface.
•
Loopback — Contains commands to manage loopback interfaces. The
Global Configuration mode command interface loopback enters the
Loopback Configuration mode to configure an loopback type interface.
SSH Public Key-chain — Contains commands to manually specify other
•
switch SSH public keys. The Global Configuration mode command crypto
key pub-key chain ssh is used to enter the SSH Public Key-chain
configuration mode.
•
SSH Public Key-string — Contains commands to manually specify the
SSH Public-key of a remote SSH Client. The SSH Public-Key Chain
Configuration mode command user-key command is used to enter the
SSH Public-Key Configuration mode.
144
Using the CLI