Dell PowerConnect 6224 Command Line Interface Manual page 131

Command
show memory cpu
show nsf
show process cpu
show sessions
show stack-port
show stack-port
counters
show stack-port diag
show stack-standby
show supported
switchtype
show switch
show system
show system id
show tech-support
show users
show version
stack
stack-port
standby
switch priority
Description
Checks the total and available RAM space on
the switch.
Shows non-stop forwarding status.
Checks the CPU utilization for each process
currently running on the switch.
Displays a list of the open telnet sessions to
remote hosts.
Displays summary stack-port information for all
interfaces.
Displays summary data counter information for
all interfaces.
Displays front panel stacking diagnostics for
each port.
Shows the Standby configured in the stack.
Displays information about all supported switch
types.
Displays information about the switch status.
Displays system information.
Displays the service ID information.
Displays system and configuration information
(for debugging/calls to technical support).
Displays information about the active users.
Displays the system version information.
Sets the mode to Stack Global Configuration
mode.
Sets the mode to Stack Global Configuration
mode to configure Stack ports as either
Stacking ports or as Ethernet ports.
Configures the standby in the stack.
Configures the ability of the switch to become
the Management Switch.
Mode*
PE
PE
PE
PE
PE
PE
PE
UE
UE
UE
UE
UE
PE
PE
UE
GC
GC
SG
GC
Command Groups
131