Telnet Server; User Interface - Dell PowerConnect 6224 Command Line Interface Manual

Command
switch renumber
telnet
traceroute
NOTE:
*For the meaning of each Mode abbreviation, see "Mode Types" on page 60.

Telnet Server

Command
ip telnet server disable
ip telnet port
show ip telnet
NOTE:
*For the meaning of each Mode abbreviation, see "Mode Types" on page 60.

User Interface

Command
enable
end
exit(configuration)
exit(EXEC)
mode simple
mode-change confirm
NOTE:
*For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
132
Command Groups
Description
Changes the identifier for a switch in the stack. GC
Logs into a host that supports Telnet.
Discovers the IP routes that packets actually
take when travelling to their destinations.
Description
Enables/disables the Telnet service on the
switch.
Configures the Telnet service port number on
the switch.
Displays the status of the Telnet server and the
Telnet service port number.
Description
Enters the privileged EXEC mode.
Gets the CLI user control back to the privileged
execution mode or user execution mode.
Exits any configuration mode to the previously
highest mode in the CLI mode hierarchy.
Closes an active terminal session by logging off
the switch.
Selects the simple mode as the start up mode.
Confirms the mode selection.
Mode*
PE
PE
Mode*
GC
GC
PE
Mode*
UE
Any
(All)
UE
GC
GC