Ipv6 Multicast - Dell PowerConnect 6224 Command Line Interface Manual

IPv6 Multicast

Command
ipv6 pimsm (Global config) Administratively enables PIMSM for IPv6
ipv6 pimsm (VLAN
Interface config)
ipv6 pimsm bsr-border
ipv6 pimsm bsr-candidate
ipv6 pimsm dr-priority
ipv6 pimsm hello-interval
ipv6 pimsm join-prune-
interval
ipv6 pimsm register-
threshold
ipv6 pimsm rp-address
ipv6 pimsm rp-candidate
ipv6 pimsm spt-threshold
ipv6 pimsm ssm
show ipv6 pimsm
show ipv6 pimsm bsr
show ipv6 pimsm interface Displays interface config parameters.
96
Command Groups
Description
multicast routing.
Administratively enables PIM-SM multicast
routing mode on a particular IPv6 router
interface.
Prevents bootstrap router (BSR) messages from
being sent or received through an interface.
Configures the router to announce its
candidacy as a bootstrap router (BSR).
Sets the priority value for which a router is
elected as the designated router (DR).
Configures the PIM-SM Hello Interval for the
specified interface.
Configures the interface join/prune interval for
the PIM-SM router
Configure the Register Threshold rate for the
RP router to switch to the shortest path.
Statically configures the RP address for one or
more multicast groups.
Configures the router to advertise itself as a
PIM candidate rendezvous point (RP) to the
bootstrap router (BSR).
Configures the Data Threshold rate for the
lasthop router to switch to the shortest path.
Defines the Source Specific Multicast (SSM)
range of multicast addresses.
Displays global status of IPv6 PIMSM and its
IPv6 routing interfaces.
Displays the bootstrap router (BSR)
information.
Mode*
GC
IC
IC
GC
IC
IC
IC
GC
GC
GC
GC
GC
PE
PE
PE