Utility Commands; Captive Portal - Dell PowerConnect 6224 Command Line Interface Manual

Utility Commands

Auto Config
Command
boot host auto-save
boot host dhcp
boot host retry-count
show boot
NOTE:
*For the meaning of each Mode abbreviation, see "Mode Types" on page 60.

Captive Portal

Command
authentication timeout
captive-portal
http port
https port
show captive-portal
show captive-portal status
block
configuration
enable
group
116
Command Groups
Description
Enables/disables automatically saving the
downloaded configuration on the switch.
Enables/disables Auto Config on the switch.
Set the number of attempts to download a
configuration.
Displays the current status of the Auto Config
process.
Description
Configures the authentication timeout.
Enables the captive portal configuration mode. GC
Configures an additional HTTP port for captive
portal to monitor.
Configures an additional HTTPS port for
captive portal to monitor.
Displays the status of captive portal.
Reports the status of all captive portal instances
in the system.
Blocks all traffic for a captive portal
configuration.
Enables the captive portal instance mode.
Globally enables captive portal.
Configures the group number for a captive
portal configuration.
Mode*
GC
GC
GC
PE
Mode*
CP
CP
CP
PE
PE
CPI
CP
CPI
CPI