Dell PowerConnect 6224 Command Line Interface Manual page 127

Command
sflow sampling (Interface
Mode)
show sflow agent
show sflow destination
show sflow polling
show sflow sampling
NOTE:
*For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
SNMP
Command
show snmp
show snmp engineID
show snmp filters
show snmp groups
show snmp users
show snmp views
show trapflags
snmp-server community
snmp-server community-
group
snmp-server contact
snmp-server enable traps
snmp-server engineID local Specifies the Simple Network Management
Description
Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
Displays the sflow agent information.
Displays all the configuration information
related to the sFlow receivers.
Displays the sFlow polling instances created on
the switch.
Displays the sFlow sampling instances created
on the switch.
Description
Displays the SNMP status.
Displays the SNMP engine ID.
Displays the configuration of filters.
Displays the configuration of groups.
Displays the configuration of users.
Displays the configuration of views.
Shows the status of the configurable SNMP
traps.
Sets up the community access string to permit
access to SNMP protocol.
Maps SNMP v1 and v2 security models to the
group name.
s up a system contact (sysContact) string.
Set
Enables SNMP traps globally or enables specific
SNMP traps.
Protocol (SNMP) engine ID on the local switch.
Command Groups
Mode*
IC
PE
PE
PE
PE
Mode*
PE
PE
PE
PE
PE
PE
PE
GC
GC
GC
GC
GC
127