Ipv6 Routing - Dell PowerConnect 6224 Command Line Interface Manual

Command
show ipv6 pimsm neighbor Displays IPv6 PIMSM neighbors learned on the
show ipv6 pimsm rphash
show ipv6 pimsm rp
mapping
NOTE:
*For the meaning of each Mode abbreviation, see "Mode Types" on page 60.

IPv6 Routing

Command
clear ipv6 neighbors
clear ipv6 statistics
ipv6 address
ipv6 enable
ipv6 forwarding
ipv6 host
ipv6 mld last-member-
query-count
ipv6 mld last-member-
query-interval
ipv6 mld-proxy
Description
routing interfaces.
Displays which rendezvous point (RP) is being
selected for a specified group.
Displays all group-to-RP mappings of which the
router is aware (either configured or learned
from the BSR).
Description
Clears all entries in the IPv6 neighbor table or
an entry on a specific interface.
Clears IPv6 statistics for all interfaces or for a
specific interface, including loopback and
tunnel interfaces.
Configures an IPv6 address on an interface
(including tunnel and loopback interfaces).
Enables IPv6 routing on an interface (including
tunnel and loopback interfaces) that has not
been configured with an explicit IPv6 address.
Enables IPv6 forwarding on a router.
Defines static host name-to- ipv6 address
mapping in the host cache.
Sets the number of listener-specific queries sent
before the router assumes that there are no local
members on the interface.
Sets the last member query interval for the
MLD interface, which is the value of the
maximum response time parameter in the
groupspecific queries sent out of this interface.
Enables MLD Proxy on the router.
Command Groups
Mode*
PE
PE
PE
Mode*
PE
PE
IC
IC
GC
GC
IC
(VLA
N)
IC
(VLA
N)
IC
97