Dell PowerConnect 6224 Command Line Interface Manual page 86

Command
show dvlan-tunnel interface Displays detailed information about Double
show interfaces switchport Displays switchport configuration.
show port protocol
show switchport protected Displays protected group/port information.
show vlan
show vlan association mac
show vlan association
subnet
switchport access vlan
switchport forbidden vlan
switchport general
acceptable-frame-type
tagged-only
switchport general allowed
vlan
switchport general ingress-
filtering disable
switchport general pvid
switchport mode
switchport protected
switchport protected name Configures a name for a protected group
switchport trunk allowed
vlan
vlan
vlan association mac
86
Command Groups
Description
VLAN Tunneling for the specified interface.
Displays the Protocol-Based VLAN information
for either the entire system or for the indicated
group
Displays VLAN information.
Displays the VLAN associated with a specific
configured MAC address.
Displays the VLAN associated with a specific
configured IP subnet.
Configures the VLAN ID when the interface is
in access mode.
Forbids adding specific VLANs to a port.
Discards untagged frames at ingress.
Adds or removes VLANs from a port in General
mode.
Disables port ingress filtering.
Configures the PVID when the interface is in
general mode.
Configures the VLAN membership mode of a
port.
Sets the port to Protected mode.
Adds or removes VLANs from a port in general
mode.
Creates a VLAN.
Associates a MAC address to a VLAN.
Mode*
PE
PE
PE
PE
PE
PE
PE
IC
IC
IC
IC
IC
IC
IC
IC
GC
IC
VLAN
VLAN