Table of Contents
Advertisement
Meaning
Related Topics
Monitoring Chassis-wide Configuration for L2TP Dial-out
Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
Operational status
5
Table 93 on page 437 lists the show l2tp tunnel summary command output fields.
Table 93: show l2tp tunnel summary Output Fields
Field Name
Administrative status
Operational status
show l2tp tunnel summary
To display the chassis-wide configuration, operational state, and statistics for L2TP
dial-out.
This command displays aspects of the dial-out state machine and details about the
dial-out routes themselves. This section presents sample output. The actual output on
your router may differ significantly.
To display chassis-wide configuration, operational state, and statistics for L2TP dial-out:
host1#show l2tp dial-out
Operational status: inService
Connecting timer value: 30 seconds
Dormant timer value: 300 seconds
To display detailed chassis-wide configuration information:
host1#show l2tp dial-out detail
Dial-out Chassis Configuration and Operational Status
Chassis operational status :
Dormant timeout
Connecting timeout
Dial-out Chassis Statistics
Current sessions:
Chapter 16: Monitoring L2TP and L2TP Dial-Out
5
0
0
up
down
lower-down
0
0
0
Field Description
Administrative status of all tunnels:
enabled—No restrictions on the creation and
operation of sessions for this tunnel
drain—Router will not create new sessions for this
tunnel
disabled—Router disabled existing sessions and
will not create new sessions for this tunnel
Operational status of all tunnels:
up—Tunnel is available
down—Tunnel is unavailable
lower-down—Tunnel is unavailable because the
destination supporting it is inaccessible
not-present—Tunnel is unavailable because the
hardware (such as a line module) supporting the
tunnel is inaccessible
inService
:
30 seconds
:
30 seconds
not-present
0
0
437
Advertisement
Table of Contents
Troubleshooting
