Monitoring Application Terminate Reason Mappings - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

JunosE 11.2.x Broadband Access Configuration Guide
Related Topics

Monitoring Application Terminate Reason Mappings

Purpose
Action
156
Table 32: show subscribers Output Fields (continued)
Field Name
Total
Domain Name
ICR-Partition (location-id)
Count
Slot
show subscribers
Display information about the mappings for application terminate reasons.
To display the current terminate reasons that are mapped to a specific
Acct-Terminate-Cause-Code:
This example uses the radius keyword to display all current terminate reasons mapped
to RADIUS Acct-Terminate-Cause codes. The output lists all PPP mappings, followed
by L2TP mappings, and then AAA mappings.
host1(config)#run show terminate-code radius
Apps Terminate Reason
--------- --------------------------
ppp authenticate-authenticator
-timeout
ppp authenticate-challenge-tim
eout
ppp authenticate-chap-no-resou
rces
ppp authenticate-chap-peer-aut
henticator-timeout
ppp authenticate-deny-by-peer
ppp authenticate-inactivity-ti
meout
ppp authenticate-max-requests
--More--
To display all terminate reasons that are mapped to a specific terminate code:
This example uses the radius keyword and a RADIUS Acct-Terminate-Cause code (radius
4) to display all terminate reasons mapped to the specified terminate code.
Field Description
Total number of users per virtual router; the sum of
the Ppp, Ip, and Tnl fields
Domain name used by the subscriber
A unique identifier for each ICR partition on a chassis.
Note that this ID different from the partition name,
which is configured using the ip vrrp vrid
icr-partitionpartitionName command.
Number of subscribers
Number of slot in the chassis
Description
--------------------------
authenticate authenticator
timeout
authenticate challenge tim
eout
authenticate chap no resou
rces
authenticate chap peer aut
henticator timeout
authenticate deny by peer
authenticate inactivity ti
meout
authenticate max requests
Copyright © 2010, Juniper Networks, Inc.
Radius
Code
------
17
10
10
17
17
4
10