Monitoring And Troubleshooting Remote Access - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

CHAPTER 2
Monitoring and Troubleshooting Remote
Access
Copyright © 2010, Juniper Networks, Inc.
Use the commands in this chapter to set baselines for and to monitor remote access.
Setting Baselines for Remote Access on page 110
How to Monitor PPP Interfaces on page 112
Monitoring AAA Accounting Configuration on page 112
Monitoring AAA Accounting Default on page 113
Monitoring Accounting Interval on page 113
Monitoring Specific Virtual Router Groups on page 114
Monitoring the Default AAA Authentication Method List on page 114
Monitoring Domain and Realm Name Delimiters on page 114
Monitoring Mapping Between User Domains and Virtual Routers on page 115
Monitoring Tunnel Subscriber Authentication on page 117
Monitoring Routing Table Address Lookup on page 117
Monitoring the AAA Model on page 117
Monitoring IP Addresses of Primary and Secondary DNS and WINS Name
Servers on page 118
Monitoring AAA Profile Configuration on page 118
Monitoring Statistics about the RADIUS Route-Download Server on page 119
Monitoring Routes Downloaded by the RADIUS Route-Download Server on page 121
Monitoring Chassis-Wide Routes Downloaded by RADIUS Route-Download
Servers on page 122
Monitoring Authentication, Authorization, and Accounting Statistics on page 124
Monitoring the Number of Active Subscribers Per Port on page 126
Monitoring the Maximum Number of Active Subscribers Per Virtual Router on page 126
Monitoring Session Timeouts on page 126
Monitoring Interim Accounting for Users on the Virtual Router on page 127
Monitoring Virtual Router Groups Configured for AAA Broadcast Accounting on page 127
Monitoring Configuration Information for AAA Local Authentication on page 128
109