Monitoring Status Of Dial-Out Sessions - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

JunosE 11.2.x Broadband Access Configuration Guide
Related Topics

Monitoring Status of Dial-out Sessions

Purpose
Action
442
Table 94: show l2tp dial-out Output Fields (continued)
Field Name
Dial-outs timed out
Dial-outs torn down
For detailed information about operational states, see Dial-Out Operational States on
page 403
show l2tp dial-out
show l2tp dial-out virtual-router
Display the status of dial-out sessions.
This command displays aspects of the dial-out state machine and details about the
dial-out routes themselves. This section presents sample output. The actual output on
your router may differ significantly.
To display all sessions within the current virtual router context:
host1#show l2tp dial-out session
Session Status
--------- ---------
10.10.1.1 connected
10.10.2.1 dormant
To display detailed information about a particular session, specify the trigger IP address
for the session:
host1#show l2tp dial-out session 10.1.1.1
Session 10.1.1.1
Operational status: dormant
To display aggregate counts for dial-out sessions in each of the possible operational and
administrative states:
host1#show l2tp dial-out session summary
To display detailed configuration, state, and statistics:
host1#show l2tp dial-out session detail
To display information about the operational or administrative state:
host1#show l2tp dial-out session state connecting
To display dial-out information across all virtual routers
host1#show l2tp dial-out session allVirtualRouters
NOTE: The level of a user's permission determines the use of the allVirtualRouters
option. For example, if you have permission to view only the current virtual router, then
that is all that is displayed when you enter a command.
Field Description
Number of times the connecting timer expired
Successful outgoing calls that were terminated
Copyright © 2010, Juniper Networks, Inc.