Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual page 102

JunosE 11.2.x Broadband Access Configuration Guide
aaa profile
allow
deny
ppp aaa-profile
64
NOTE: If there is no matching entry in the AAA profile for the user's domain name or
for the domain name default, then AAA continues processing as if there were no AAA
profile.
If the user's name does not contain a domain name, then AAA attempts to match to
the domain name none in the AAA profile. If there is no entry for none, then AAA attempts
to match for the domain name default in the AAA profile. If there is no entry for either
none or default, then AAA continues processing as if there were no AAA profile.
Use to configure a new AAA profile.
Example
host1(config)#aaa profile boston123
Use the no version to delete the AAA profile.
See aaa profile
Use to specify the domain name(s) that you want to be allowed access to AAA
authentication.
This command does not indicate that the user will be granted access; it is simply the
first access point to AAA authentication.
Using this command does not implicitly deny all other domains.
Example
host1(config-aaa-profile)#allow xyz.com
Use the no version to negate the command.
See allow
Use to specify the domain name(s) that you want to be denied access to AAA
authentication.
Example
host1(config-aaa-profile)#deny xyz.com
Use the no version to negate the command.
See deny
Copyright © 2010, Juniper Networks, Inc.