Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual page 114

JunosE 11.2.x Broadband Access Configuration Guide
aaa profile
76
host1(config-aaa-profile)#pre-authenticate
host1(config-aaa-profile)#exit
Define a RADIUS preauthentication server.
2.
host1(config)#radius pre-authentication server 10.10.10.1
host1(config-radius)#key abc123
host1(config-radius)#exit
Associate the AAA profile with the designated PPP interface.
3.
host1(config)#interface atm 4/3.101
host1(config-subif)#ppp aaa-profile preAuthLlid
(Optional) Verify that preauthentication support is configured for the AAA profile.
4.
host1(config-subif)#run show aaa profile name PreAuthLlid
preAuthLlid:
atm nas-port-type: ADLSL-CAP
ethernet nas-port-type: Cable
profile-service-description: xyzService
pre-authenticate
allow xyz.com
deny default
translate xyz1.com abc.com
For information, see "Setting Baselines for Remote Access" on page 110.
(Optional) Verify configuration of the RADIUS preauthentication server.
5.
host1(config-subif)#run show radius pre-authentication servers
RADIUS Pre-Authentication Configuration
---------------------------------------
Udp
IP Address Port
------------- ----
10.10.10.1 1812
You can also display configuration information for preauthentication servers by using
the show radius servers command. For information, see "Setting Baselines for
Remote Access" on page 110.
(Optional) Display statistics for the RADIUS preauthentication server.
6.
To display preauthentication statistics, use the show radius pre-authentication
statistics command. For information, see "Setting Baselines for Remote Access" on
page 110.
To display a count of preauthentication requests and responses, use the show aaa
statistics command. For information, see "Setting Baselines for Remote Access" on
page 110.
Use to configure a new AAA profile.
Example
host1(config)#aaa profile boston123
Retry Maximum
Count Timeout Sessions
----- ------- --------
3 3 255
Copyright © 2010, Juniper Networks, Inc.
Dead
Time Secret
---- ------
0 radius