Monitoring The Status Of Radius Relay Udp Checksums; Monitoring The Status Of Icr Partition Accounting; Table 63: Show Radius Relay Udp-Checksum Output Fields - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Monitoring the Status of RADIUS Relay UDP Checksums

Purpose
Action
Meaning
Related Topics

Monitoring the Status of ICR Partition Accounting

Purpose
Action
Meaning
Related Topics
Copyright © 2010, Juniper Networks, Inc.
Display status of RADIUS relay UDP checksums.
To display the status of UDP checksums:
host1(config)#show radius relay udp-checksum
udp-checksums enabled
Table 63 on page 309 lists the show radius relay udp-checksum command output fields.

Table 63: show radius relay udp-checksum Output Fields

Field Name
udp-checksums
show radius relay udp-checksum
Display the status of ICR partition accounting.
To display the status of ICR partition accounting:
host1#show radius icr-partition-accounting
enabled
ICR partition accounting status is either enabled or disabled.
show radius icr-partition-accounting
Field Description
Status of UDP checksums: enabled or disabled
Chapter 8: Monitoring RADIUS
309