tunnel-preference
tunnel-server-attributes
tunnel-server-auth-id
tunnel-server-endpoint
tunnel-type
Meaning
Related Topics
Monitoring Ignored RADIUS Attributes
Purpose
Action
Related Topics
Copyright © 2010, Juniper Networks, Inc.
n/c
n/c
n/c
n/c
n/c
n/c
n/c
n/c
n/c
n/c
Table 58 on page 303 lists the show radius attributes-included command output fields.
Table 58: show radius attributes-included Output Fields
Field Name
Attribute Name
Account On
Account Off
Access Request
Account Start
Account Stop
show radius attributes-included
Display the RADIUS attributes that are ignored in Access-Accept messages.
To display the RADIUS attributes that are ignored:
host1#show radius attributes-ignored
attribute framed-ip-netmask ignored from RADIUS server
attribute atm-service-category (vsa) accepted from RADIUS server
attribute atm-mbs (vsa) accepted from RADIUS server
attribute atm-pcr (vsa) accepted from RADIUS server
attribute atm-scr (vsa) accepted from RADIUS server
attribute egress-policy-name (vsa) accepted from RADIUS server
attribute ingress-policy-name (vsa) accepted from RADIUS server
attribute virtual-router (vsa) accepted from RADIUS server
attribute pppoe-max-session (vsa) ignored from RADIUS server
show radius attributes-ignored
n/c
enabled
enabled
disabled
disabled
disabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
Field Description
Name of the RADIUS attribute
Include status of the attribute in Acct-On messages:
enabled, disabled, not configurable (n/c)
Include status of the attribute in Acct-Off messages:
enabled, disabled, n/c
Include status of the attribute in Access Request
messages: enabled, disabled, n/c
Include status of the attribute in Acct-Start messages:
enabled, disabled, n/c
Include status of the attribute in Acct-Stop messages:
enabled, disabled, n/c
Chapter 8: Monitoring RADIUS
303