Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual page 701

service-management service-session-profile
statistics
Copyright © 2010, Juniper Networks, Inc.
To create or modify a service session profile:
Specify the name of the service session profile; doing this enters Service Session
1.
Profile Configuration mode.
host1(config)#service-management service-session-profile vodISP1
host1(config-service-session-profile)#
Specify the attributes you want to include in the profile.
2.
host1(config-service-session-profile)#statistics volume-time
host1(config-service-session-profile)#time 6000
(Optional) To modify an existing profile, you can add new attributes or use the no
3.
version of a command to remove an attribute.
host1(config-service-session-profile)#no time
Use to create a new service session profile or to specify the name of an existing profile
you want to modify, and to enter Service Session Profile Configuration mode.
In Service Session Profile Configuration mode, you specify the attributes used in the
service session profile, such as the maximum volume limit for the session and the
maximum time the session can be used. You can also specify that Service Manager
collect statistics for time, or volume, or both.
Example
host1(config)#service-management service-session-profile vodISP1
host1(config-service-session-profile)#
Use the no version to delete the service session profile.
See service-management service-session-profile
Use to enable statistics collection and to specify the type of statistics to collect.
Use the time keyword to collect statistics about the duration of the service session.
Use the volume-time keyword to collect statistics about both the volume of traffic
and the duration of the service session.
Example
host1(config)#service-management service-session-profile vodISP1
host1(config-service-session-profile)#statistics volume-time
Use the no version to disable statistics collection.
Chapter 27: Configuring Service Manager
663