JunosE 11.2.x Broadband Access Configuration Guide
radius include acct-multi-session-id
radius include acct-link-count
radius include input-gigawords
200
[50] Acct-Multi-Session-Id
Use the following command to manage the Acct-Multi-Session-Id RADIUS attribute.
radius include acct-multi-session-id
Use to include the Acct-Multi-Session-Id attribute in Access-Request, Acct-Start, or
Acct-Stop messages.
You can control inclusion of the Acct-Multi-Session-Id attribute by enabling or disabling
this command.
See radius include
Example
host1(config)#radius include acct-multi-session-id acct-stop disable
Use the no version to restore the default, enable for accounting messages and disable
for access requests.
[51] Acct-Link-Count
Use the following command to manage the Acct-Link-Count RADIUS attribute.
radius include acct-link-count
Use to include the Acct-Link-Count attribute in Acct-Start and Acct-Stop messages.
You can control inclusion of the Acct-Input-Gigawords attribute by enabling or disabling
this command.
See radius include
Example
host1(config)#radius include acct-link-count acct-stop disable
Use the no version to restore the default, enable.
[52] Acct-Input-Gigawords
Use the following command to manage the Acct-Input-Gigawords RADIUS attribute.
radius include input-gigawords
Use to include the Acct-Input-Gigawords attribute in Acct-Stop messages.
You can control inclusion of the Acct-Input-Gigawords attribute by enabling or disabling
this command.
See radius include
Copyright © 2010, Juniper Networks, Inc.