Table 105: Show Dhcp Count Output Fields - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

JunosE 11.2.x Broadband Access Configuration Guide
Meaning
532
-------- -------- ----------
external 0.0.0.0 3
This show dhcp count command uses the * (asterisk) regular expression metacharacter
in the interface string to display information for DHCP client bindings on virtual router
vr2 with an IP address beginning with 71 and ending with 4.
To display count information for DHCP client bindings and interfaces that match the
specified circuit ID string:
host1:vr3#show dhcp count circuit-id \\xe3
Type IpSubnet Interfaces
------- -------- ----------
relay-p 0.0.0.0 1
To specify nonprintable byte codes in the circuit ID string or remote ID string, you can use
the string \\xab, where ab is a hex code of the byte. This show dhcp count command
uses the string \\xe3 to represent byte E3 in the circuit ID string. This command displays
information for the DHCP client bindings on virtual router vr3 with the specified circuit ID
string, with results arranged in ascending order by binding ID.
To display count information for DHCP local server client bindings and interfaces with a
specified subnet address:
host1:vr1#show dhcp count local 0.0.0.0
To display count information for DHCP client bindings and interfaces with a specified IP
prefix:
host1:vr1#show dhcp count ip prefix 71.1.0.0/28
To display count information for DHCP relay proxy client bindings without a lower-layer
interface:
host1:vr1#show dhcp count relay proxy no-interface
To display count information for DHCP client bindings that match the specified remote
ID string:
host1:vr1#show dhcp count remote-id "remote id.*odd"
Filtering the display of DHCP client bindings by the circuit ID string or remote ID string is
not supported for the DHCP external server application. DHCP external server does not
store information about the agent-circuit-id suboption or agent-remote-id suboption of
option 82.
Table 105 on page 532 lists the show dhcp count command output fields.

Table 105: show dhcp count Output Fields

Field Name
Type
IpSubnet
------- --------
3 3
Assigned
Clients Clients
------- --------
15 15
Field Description
Binding type; external (DHCP external server), local (DHCP local
server), or relay-p (DHCP relay proxy)
For DHCP local server bindings, the subnet of the IP address
assigned to the client; 0.0.0.0 for DHCP external server and DHCP
relay proxy bindings
Copyright © 2010, Juniper Networks, Inc.
-------
3
Bound
Clients
-------
15