Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual page 109

aaa route-download now
aaa route-download suspend
clear ip routes download
Copyright © 2010, Juniper Networks, Inc.
password—The password used in RADIUS Access-Request messages for
route-download requests. You can specify from 1 through 32 alphanumeric characters.
The default password is juniper.
synchronization—The time that the server starts the route download operation each
day. You specify the time in 24-hour format, for example 03:45:00.
Example
host1(config)#aaa route-download 1200 retry-interval 25 password dl1456atl
synchronization 03:45:00
Use the no version to disable the route-download server.
See aaa route-download
Use to specify that the RADIUS route-download server immediately restart the route
download operation.
If a download is currently in progress when you issue this command without the force
keyword, the in-progress download continues until complete. No additional download
is started.
Use the force keyword to start an immediate download; a currently running download
is interrupted. The download is not retried if it fails.
Use the adjust-scheduler keyword to restart the configured download interval from
the time of this download. However, if the download fails, the download interval is not
changed and the download is not retried.
Example
host1#aaa route-download now force adjust-scheduler
There is no no version.
See aaa route-download now
Use to temporarily suspend the RADIUS route-download server operation.
Example
host1#aaa route-download suspend
Use the no version to restore the route download operation.
See aaa route-download suspend
Use to synchronize downloaded access routes and the routes that are installed in the
routing tables of virtual routers.
Use the following options to synchronize downloaded routes for a specific virtual router:
Chapter 1: Configuring Remote Access
71