Monitoring Dhcp Bindings; Monitoring Dhcp Binding Information - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

JunosE 11.2.x Broadband Access Configuration Guide
Related Topics

Monitoring DHCP Bindings

Related Topics

Monitoring DHCP Binding Information

Purpose
Action
528
Table 103: show ip dhcp-local excluded Output Fields (continued)
Field Name
High Address
show ip dhcp-local excluded
Tasks to monitor DHCP bindings are:
Monitoring DHCP Binding Information on page 528
Monitoring DHCP Binding Count Information on page 531
Monitoring DHCP Binding Host Information on page 533
"Monitoring DHCP Bindings (Displaying IP Address-to-MAC Address Bindings)" on
page 535
"Monitoring DHCP Bindings (Displaying DHCP Bindings Based on Binding ID)" on
page 536
"Monitoring DHCP Bindings (Local Server Binding Information)" on page 537
show dhcp binding
show dhcp count
show dhcp host
show ip dhcp-external binding
show ip dhcp-external binding-id
show ip dhcp-local binding
Display information for specified DHCP client bindings, with results arranged in ascending
order by binding ID.
NOTE: The show dhcp binding command replaces the show ip dhcp-external binding,
show ip dhcp-external binding-id, and show ip dhcp-local binding commands, which
are deprecated and might be removed completely in a future release.
To display information about all DHCP local server bindings:
host1:vr1#show dhcp binding local
BindingId HwAddress
Field Description
Last address in a range of addresses
Type IpSubnet IpAddress State
Copyright © 2010, Juniper Networks, Inc.