Setting A Baseline For Radius Statistics; Setting The Baseline For Src Statistics; How To Monitor Ppp Interfaces; Monitoring Aaa Accounting Configuration - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

JunosE 11.2.x Broadband Access Configuration Guide

Setting a Baseline for RADIUS Statistics

Purpose
Action

Setting the Baseline for SRC Statistics

Purpose
Action

How to Monitor PPP Interfaces

Purpose
Action

Monitoring AAA Accounting Configuration

Purpose
Action
112
Set a baseline for RADIUS statistics.
Issue the show radius statistics command:
host1#show radius statistics
There is no no version.
Set a baseline for SRC statistics.
Issue the show sscc statistics command:
host#1show sscc statistics
There is no no version.
Monitor PPP interfaces.
Use the following commands:
show ppp interface summary
show ppp interface <selective control>
For details on the show ppp commands, see JunosE Link Layer Configuration Guide.
You can use the output filtering feature of the show command to include or exclude lines
of output based on a text string you specify. For details, see JunosE System Basics
Configuration Guide.
NOTE: AAA and RADIUS statistics are not preserved across a warm restart when stateful
SRP Switchover is enabled.
Display the AAA accounting configuration.
To display the show aaa accounting command:
host1:vrXyz7#show aaa accounting
Accounting duplication set to router vrXyz25
Broadcast accounting uses group groupXyzCompany20
send acct-stop on AAA access deny is enabled
send acct-stop on authentication server access deny is disabled
acct-interval (for PPP Clients) 0
Copyright © 2010, Juniper Networks, Inc.