Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual page 69

radius algorithm
radius override nas-info
radius rollover-on-reject
Copyright © 2010, Juniper Networks, Inc.
host1(config-radius)exit
host1(config)#radius authentication server 10.10.10.2
host1(config-radius)exit
host1(config)#radius authentication server 10.10.10.3
host1(config-radius)exit
host1(config)#radius accounting server 10.10.10.20
host1(config-radius)exit
host1(config)#radius accounting server 10.10.10.30
Use the no version to delete the instance of the RADIUS server.
See radius accounting server
Use to specify the algorithm—either direct or round-robin—that the E Series RADIUS
client uses to contact the RADIUS server.
The algorithm that you choose impacts the display status of a RADIUS server. For
information on the effect of the algorithm configuration on the display of the show
radius servers command, see "Monitoring RADIUS Server Information" on page 140
Example
host1(config)#radius algorithm round-robin
Use the no version to set the algorithm to the default, direct.
See radius algorithm
Use to configure the RADIUS client to include the NAS-IP-Address [4] and
NAS-Identifier [32] RADIUS attributes of the authenticating virtual router in accounting
packets when the client performs AAA broadcast accounting. Normally, the accounting
packets include the NAS-IP-Address and NAS-Identifier of the virtual router that
generated the accounting information.
This override operation is a per-virtual router specification; use this command in the
correct virtual router context.
This command is ignored if the authenticating virtual router does not have a configured
RADIUS server.
Example
host1(config)#virtual-router vrXyz1
host1:vrXyz1(config)#radius override nas-info
host1:vrXyz1(config)#exit
Use the no version to restore inclusion of the NAS-IP-Address [4] and NAS-Identifier
[32] RADIUS attributes of the virtual router that requested the accounting information.
See radius override nas-info
Chapter 1: Configuring Remote Access
31