DHCP Local Server Configuration Tasks
Copyright © 2010, Juniper Networks, Inc.
This section covers the configuration tasks for equal-access and standalone modes.
Perform the appropriate procedure:
For both equal-access and standalone modes, configure the DHCP local server.
1.
See "Configuring AAA Authentication for DHCP Local Server Standalone Mode" on
page 474 for a sample configuration.
For standalone mode, optionally configure the router to use AAA authentication for
2.
DHCP requests from subscribers.
See "Configuring AAA Authentication for DHCP Local Server Standalone Mode" on
page 474 for a sample configuration.
For non-PPP equal access, configure the router to work with the SRC software.
3.
See "Configuring the Router to Work with the SRC Software" on page 479 for a sample
configuration.
Chapter 18: DHCP Local Server Overview
463