Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual page 479

Copyright © 2010, Juniper Networks, Inc.
Table 94: show l2tp dial-out Output Fields (continued)
Field Name
Targets removed
Targets in down state
Targets in inhibited state
Targets in in-service state
Triggers discarded
Dial-out session statistics
Sessions active
Sessions created
Sessions removed
Sessions reset
Triggers received
Triggers enqueued
Triggers discarded
Triggers forwarded
Triggers max enqueued
Authentication requests
No resources for authentication
Authentication grants
Authentication Denies
Dial-outs requested
Dial-outs rejected
Dial-outs established
Chapter 16: Monitoring L2TP and L2TP Dial-Out
Field Description
Targets deleted
Targets in the down state
Targets in the inhibited state
Targets in the inService state
Trigger packets discarded
Statistics at the session level
Currently active sessions
All sessions created
Sessions deleted
Sessions reset using the l2tp dial-out session reset
command
Triggers received for dial-out sessions
Triggers that have been put into the queue
Trigger packets discarded
Trigger packets forwarded
Maximum number of triggers that have been
enqueued simultaneously since the last router reset
Authentication requests received
Authentication requests not processed because of
insufficient resources
Authentication requests granted
Authentication requests denied
Outgoing calls requested for sessions
Outgoing call requests that were rejected
Successful outgoing calls before the connecting timer
expired
441