Table 145: Sample Radius Access-Accept Packet - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Copyright © 2010, Juniper Networks, Inc.
Table 144: Service Manager RADIUS Attributes (continued)
Attribute
Number Attribute Name
[44] Acct-Session-ID
NOTE: Service Manager statistics collection is a three-part procedure. You must
configure statistics information in the service definition macro file, enable statistics
collection in the RADIUS record, and also enable statistics collection for the policy
referenced in the service macro using the statistics enabled keyword in the command
used for policy attachment in the profile.
The Service-Volume and Service-Timeout VSAs rely on the values captured by the
Service Manager statistics feature to determine when a threshold is exceeded. Therefore,
you must configure and enable statistics collection to use these attributes.
Service-Volume For detailed information about Service Manager statistics see
"Configuring Service Manager Statistics" on page 667.
Table 145 on page 645 describes a partial RADIUS Access-Accept packet that activates
a service session for subscriber client1@isp1.com. (Figure 29 on page 630 shows the service
definition macro file that creates the tiered service.) The session enables the subscriber
to use the tiered service with an input bandwidth of 1280000 and output bandwidth of
5120000. The subscriber can use the service for 5 hours (18000 seconds), and Service
Manager captures both timestamp and volume statistics during the session
(service-statistics value of 2). Also, accounting for the service is updated every 600
seconds (10 minutes).

Table 145: Sample RADIUS Access-Accept Packet

RADIUS Attribute
username
class
service-activation
service-timeout
service-statistics
service-interim-acct-interval
Chapter 27: Configuring Service Manager
RADIUS
Message Type VSA Description
Acct-Start Accounting identifier that makes it
Acct-Stop easy to match start and stop records
Interim-Acct in a log file; the format is extended to
include a colon-separated value that
uniquely identifies the subscriber
session
Tag Value
none client1@isp1.com
none (binary data)
6 tiered(1280000, 5120000)
6 18000
6 2
6 600
645