Table of Contents
Advertisement
Table 49: RADIUS IETF Attributes Supported by JunosE Software
(continued)
Attribute
Number
Attribute Name
[97]
Framed-Ipv6-Prefix
[99]
Framed-Ipv6-Route
[100]
Framed-Ipv6-Pool
[101]
Error-Cause
[123]
Delegated-Ipv6-Prefix
[135]
Ascend-Primary-DNS
[136]
Ascend-Secondary-DNS
[188]
Ascend-Num-In-Multilink
[242]
Ascend-Data-Filter
Juniper Networks VSAs
Copyright © 2010, Juniper Networks, Inc.
Description
Provides the IPv6 prefix that is delegated to a downstream CPE
Provides routing information to be configured for the user on the NAS
Name of the local address pool from which an IPv6 prefix is assigned to the
requesting router
4-octet field that contains an integer that specifies the cause of the error
IPv6 prefix to be delegated to clients using the DHCPv6 Prefix Delegation mechanism
Indicates the IP address of the primary DNS
The format is 1 byte of type (135), 1 byte of length (length=6),
4 bytes of value (IPv4 address)
Indicates the IP address of the secondary DNS
The format is 1 byte of type (136), 1 byte of length (length=6),
4 bytes of value (IPv4 address)
Current number of links in a multilink bundle
RADIUS policy definitions used to configure a policy to classify packet flows and
perform filter, forward, packet marking, rate-limit profile, and traffic class actions
Table 50 on page 256 lists Juniper Networks VSA formats for RADIUS. JunosE Software
uses the vendor ID assigned to Juniper Networks (vendor ID 4874) by the Internet Assigned
Numbers Authority (IANA).
Chapter 6: RADIUS Attribute Descriptions
255
Advertisement
Table of Contents
Troubleshooting
