Monitoring The Number Of Active Subscriber And Service Sessions With Service Manager - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

JunosE 11.2.x Broadband Access Configuration Guide
Related Topics

Monitoring the Number of Active Subscriber and Service Sessions with Service Manager

Purpose
710
Table 164: show service-management subscriber-session Output
Fields (continued)
Field Name
Statistics Type
Statistics Complete
Poll Interval
Poll Expire
Activate Time
Time
Time Expire
Volume
Volume Expire
Input Bytes
Output Bytes
Input Packets
Output Packets
show service-management subscriber-session
Display the total number of active subscriber and service sessions configured on your
router.
Field Description
Type of statistics collected; none, time, or
volume-time
Whether statistics have been successfully collected;
True or False
Interval, in seconds, that interim statistics reports are
sent
Number of seconds until the next statistics report is
sent
Day, date, and time when the service session was
activated
Time threshold value set by service session profile or
RADIUS VSA
Time left until the threshold expires; this value starts
as the time threshold value and is decremented as
time passes
Volume threshold value set by service session profile
or RADIUS VSA
Volume left until the threshold is exceeded; this value
starts as the volume threshold value and is
decremented as the service statistics measure volume
Current value of input bytes that the statistics
configuration is measuring
Current value of output bytes that the statistics
configuration is measuring
Current value of input packets that the statistics
configuration is measuring
Current value of output packets that the statistics
configuration is measuring
Copyright © 2010, Juniper Networks, Inc.