Monitoring Tacacs; Chapter 10 Monitoring Tacacs; Setting Baseline Tacacs+ Statistics; Monitoring Tacacs+ Statistics - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

CHAPTER 10

Monitoring TACACS+

Setting Baseline TACACS+ Statistics

Related Topics

Monitoring TACACS+ Statistics

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
This chapter describes how to monitor the current TACACS+ configurations.
TACACS+ topics are described in the following sections:
Setting Baseline TACACS+ Statistics on page 323
Monitoring TACACS+ Statistics on page 323
Monitoring TACACS+ Information on page 325
You can set a baseline for TACACS+ statistics.
To set the baseline:
Issue the baseline tacacs command:
host1#baseline tacacs
There is no no version.
baseline tacacs
Display TACACS+ statistics.
To display TACACS+ statistics:
host1#show statistics tacacs
TACACSPLUS Statistics
---------------------
Statistic 10.5.0.174
--------------- ----------
Search Order 1
TCP Port 3049
Auth Requests 140
Auth Replies 85
Auth Pending 43
Auth Timeouts 12
Author Requests 6399
Author Replies 6301
10.5.1.199
----------
2
4049
0
0
0
0
97
0
323