Monitoring Dhcp Bindings; Bindings) - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Related Topics
Monitoring DHCP Bindings (Displaying IP Address-to-MAC Address Bindings)
Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
Table 106: show dhcp host Output Fields (continued)
Field Name
Type
IpSubnet
IpAddress
State
Server
Giaddr
Lease
Remaining
IpInterface
show dhcp host
To compare the output of the show dhcp host command and the show dhcp binding
command, see Monitoring DHCP Binding Information on page 528
Display the mapping between the assigned IP address and the MAC address of the
subscriber's computer.
NOTE: This command is deprecated and might be removed completely in a future
release. The function provided by this command has been replaced by the show dhcp
binding command.
To display the DHCP IP address to MAC address bindings:
Chapter 22: Monitoring and Troubleshooting DHCP
Field Description
Binding type; external (DHCP external server), local (DHCP local
server), or relay-p (DHCP relay proxy)
For DHCP local server bindings, the subnet of the IP address
assigned to the client; 0.0.0.0 for DHCP external server and DHCP
relay proxy bindings
IP address assigned to client
State of the DHCP client binding
(Detailed output only) IP address of the DHCP server that
allocated the client IP address
(Detailed output only) For DHCP relay proxy the IP address of the
DHCP relay proxy; for DHCP local server bindings, the IP address
of the DHCP relay that sent the packet or 0.0.0.0 if the packet
comes from the client; for DHCP external server bindings, the
giaddr from the DHCP packet
(Detailed output only) Total time for which the IP address is
available, in seconds
(Detailed output only) Time remaining on the current lease, in
seconds
(Detailed output only) IP interface that is associated with the
client
535