Monitoring Statistics For Connections To The Http Local Server; Table 153: Show Ip Http Server Output Fields - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Meaning
Related Topics

Monitoring Statistics for Connections to the HTTP Local Server

Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
Same host limit: 3
Protocol: IPv6
Table 153 on page 689 lists the show ip http server command output fields.

Table 153: show ip http server Output Fields

Field Name
Admin status
Access class
Listening port
Same host limit
Protocol
show ip http server
Display statistics about the connections to the HTTP local server.
To display statistics about HTTP local server with the baseline values subtracted:
host1#show ip http statistics delta
Server enable count: 1
Server disable count: 0
Same host enforced: 0
Access class denies: 0
No resource failures: 0
Http connections created: 2
Http connections terminated: 2
Http connections aged out: 1
Urls successfully served: 0
Malformed http requests: 0
Urls not found: 0
Table 154 on page 690 lists the show ip http statistics command output fields.
Chapter 28: Monitoring Service Manager
Field Description
Status of the HTTP local server in the software:
enabled or disabled.
Enabled implies that the HTTP local server can listen
for IPv4 , IPv6, or both IPv4 and IPv6 exception
packets.
Name of a standard IP access list that determines
which hosts can log on to the HTTP local server
Port that the HTTP local server uses to track requests
for connection
Maximum number of connections allowed between
one IP address and the HTTP local server
Protocols that the HTTP local server is listening for:
IPv4, IPv6, or IPv4 and IPv6.
689