Table 113: Show Ip Dhcp-Local Pool Output Fields - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Meaning
Copyright © 2010, Juniper Networks, Inc.
Mask - 255.255.255.0
NETBIOS Node Type - 1
Lease - Days:0 Hours:0 Minutes:24 Seconds:0
Grace Period - Days:0 Hours:0 Minutes:10 Seconds:0
Grace period for released leases enabled
DNS Servers
10.10.1.1
NETBIOS Name Servers
10.10.1.1
10.10.1.2
Default Routers
10.10.1.3
Server Address - 10.10.20.8
Linked Pool - cable5
High utilization threshold - 85%
Abated utilization threshold - 75%
Current utilization - 0%
Utilization trap disabled.
Shared pool allocations - 25
To display information about local address pool groups:
host1#show ip dhcp-local pool groups
DHCP Local Server Pool Groups
There is 1 group configured
*****************************************
Group Name: pool8_7-1-Group
Total Addresses Available: 145
Total Addresses In Use:
High Utilization Thresh:
Abated Utilization Thresh: 75%
Current Utilization:
Trap Enabled:
====== Pools ======
pool8_7-1
pool8_7-2
pool8_7-3
pool8_7-4
pool8_7-5
Table 113 on page 541 lists the show ip dhcp-local pool command output fields.

Table 113: show ip dhcp-local pool Output Fields

Field Name
Pool Name
Pool Id
Domain Name
Network
Mask
Chapter 22: Monitoring and Troubleshooting DHCP
0
85%
0%
no
Field Description
Name of the DHCP local pool
ID of the pool
Domain name assigned to the pool
Addresses that the DHCP local server can provide from the pool
Subnet mask that goes with the network address
541