Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual page 146

Software for e series broadband services routers broadband access configuration guide
Table of Contents

Advertisement

JunosE 11.2.x Broadband Access Configuration Guide
108
host1(config-if)#exit
When the PE router receives a request for DHCPv6 Prefix Delegation over the gigabit
Ethernet interface 2/1/4.100, prefixes are allocated to the client from the example local
pool. In this example, the local pool to use for allocation of prefixes is selected based on
the IPv6 address of the interface over which the request is received.
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2

Table of Contents