Monitoring Radius Dynamic-Request Servers - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

JunosE 11.2.x Broadband Access Configuration Guide

Monitoring RADIUS Dynamic-Request Servers

240
Use to specify the UDP port on which the RADIUS dynamic-request server listens to
receive messages from the RADIUS server.
Example
host1(config-radius)#udp-port 1770
Use the no version to return to the default, port 1700.
See udp-port
To monitor RADIUS dynamic-request servers, see:
"Setting the Baseline for RADIUS Dynamic-Request Server Statistics" on page 304
"Monitoring RADIUS Dynamic-Request Server Statistics" on page 304
"Monitoring the Configuration of the RADIUS Dynamic-Request Server" on page 305
Copyright © 2010, Juniper Networks, Inc.