Service Manager Radius Attributes - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Service Manager RADIUS Attributes

Copyright © 2010, Juniper Networks, Inc.
To configure a service session that will be activated by RADIUS:
Create the RADIUS record for the subscriber and service:
1.
For RADIUS login—Create the RADIUS record for the subscriber and include the
Activate-Service VSA in the record. Specify values for the parameters defined in
the service template name of the definition macro file.
For RADIUS CoA—Format the CoA message to create the RADIUS record for the
subscriber. Include the Activate-Service VSA in the record. Optionally, include the
Deactivate-Service VSA if the subscriber has an active service session that you
want to deactivate. Specify values for the parameters defined in the service
template name of the definition macro file.
NOTE: You specify the parameter values in the order in which the parameters appear
in the template name of the service definition file. For example, in the tiered service
that is defined in Figure 29 on page 630, the template name is:
<# tiered(inputBW, outputBW) #>
For the RADIUS Activate-Service VSA, you specify values for the input and output
bandwidth:
tiered(1280000, 5120000)
Specify optional VSAs for the service session as needed:
2.
Service-Volume
Service-Timeout
Service-Statistics
For the RADIUS login method, the RADIUS VSAs for service activation, threshold
configuration, statistics configuration, and interim accounting in Access-Accept messages
at subscriber login are used by Service Manager to activate the appropriate service session.
For the RADIUS CoA method, Service Manager uses the VSAs for service activation and
deactivation, threshold configuration, statistics configuration, and interim accounting in
CoA-Request messages to activate the service session. The accounting-related VSAs
are included in RADIUS accounting messages.
Table 144 on page 644 lists the Service Manager-related attributes and indicates which
are tagged VSAs. See "Using Tags with RADIUS Attributes" on page 646 for a discussion
about using tagged VSAs to group attributes for a service.
Chapter 27: Configuring Service Manager
643