Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual page 698

JunosE 11.2.x Broadband Access Configuration Guide
service-management subscriber-session service-session
660
Use this command in Privileged Exec mode to create a dynamic subscriber
session—dynamic sessions are deleted after a router reboot.
Use this command in Global Configuration mode to create persistent subscriber sessions
that are retained across reboots.
Specify the name of the owner (the method originally used to create the subscriber
session), and the ID generated by the of the owner. For example, if RADIUS was used
to create the subscriber session, the owner name is AAA and the owner ID is the
Acct-Session-ID generated by RADIUS when the subscriber session was created.
Include the optional service-session-profile keyword to assign a profile to the service
session. The service session profile includes additional attributes, such as the type of
statistics to be captured for the service session.
You can activate one subscriber session for a subscriber—and multiple service sessions
for a particular subscriber session. If you create a second subscriber session for the
same subscriber, only the newest subscriber session, with its services, is used.
Example 1—Activate a service session for an existing subscriber
host1(config)#service-management owner-session aaa 573498 service-session
"video(4500000, 192.168.10.3)"
Example 2—Activate multiple service sessions for an existing subscriber
host1(config)#service-management owner-session aaa 573498 service-session
"video(4500000, 192.168.10.3)"
host1(config)#service-management owner-session aaa 573498 service-session
"tiered(1000000, 2000000)"
host1(config)#service-management owner-session aaa 573498 service-session
"voice(1000000, 10.10.10.1)"
Example 3—Include a service session profile when you activate a subscriber's service
session
host1(config)#service-management owner-session aaa 426777 service-session
"video(4500000, 192.168.10.3)" service-session-profile vodISP1
Use the no version to deactivate service sessions based on owner information. See
"Using the CLI to Deactivate Subscriber Service Sessions" on page 665 for more
information about deactivating subscriber service sessions.
See service-management owner-session
Copyright © 2010, Juniper Networks, Inc.