Table 28: Show Radius Servers Output Fields - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Related Topics
Copyright © 2010, Juniper Networks, Inc.
Udp Retry
IP Address Port Count
------------- ---- -----
RADIUS Pre-Authentication Configuration
---------------------------------------
Udp Retry
IP Address Port Count
------------- ---- -----
RADIUS Route-Download Configuration
-----------------------------------
Udp Retry
IP Address Port Count
------------- ---- -----
Table 28 on page 141 lists the show radius servers command output fields.

Table 28: show radius servers Output Fields

Field Name
IP Address
Udp Port
Retry Count
Timeout
Maximum Sessions
Dead Time
Secret
Status
show radius servers
Chapter 2: Monitoring and Troubleshooting Remote Access
Maximum Dead
Timeout Sessions Time
------- -------- ----
Maximum Dead
Timeout Sessions Time
------- -------- ----
Maximum Dead
Timeout Sessions Time
------- -------- ----
Field Description
IP address of RADIUS server
Number of the UDP port of the RADIUS server
Maximum number of times that the router retransmits a
RADIUS packet to the RADIUS server
Interval (in seconds) before the router retransmits a
RADIUS packet to the RADIUS server
Number of outstanding requests to the RADIUS server
Amount of time to remove the authentication server or
accounting server from the available list when a timeout
occurs
Configured authentication server or accounting server
secret
Status of the configured RADIUS server:
dead-The status displayed if the server does not respond
within the configured number of retransmit counts, and
if Dead Time is configured to a non-zero value.
active-The status displayed of the earliest configured,
non-dead server if the server is accessed using the direct
algorithm. The status displayed of all non-dead servers
if the server is accessed using the round-robin algorithm.
alive-The status displayed of all non-dead servers except
the earliest configured non-dead server, if the server is
accessed using the direct algorithm. The status of none
of the servers if the server is accessed using the
round-robin algorithm.
Secret Status
------ ------
Secret Status
------ ------
Secret Status
------ ------
141