Configuring Dhcp External Server To Re-Authenticate Auto-Detected Dynamic Subscriber Interfaces - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Configuring DHCP External Server to Re-Authenticate Auto-Detected Dynamic
Subscriber Interfaces
Related Topics
Copyright © 2010, Juniper Networks, Inc.
You can use the ip re-authenticate-auto-detect ip-subscriber command to
re-authenticate the auto-detected subscribers or Dynamic Subscriber Interfaces (DSIs)
created on static and dynamic primary IP interfaces, using the DHCP options when the
DHCP external application manages the DSIs following a cold boot. The no version
negates the command or restores the defaults.
To enable the IP Subscriber Manager application to re-authenticate the auto-detected
subscribers created on static and dynamic primary IP interfaces after a cold boot:
Issue the ip re-authenticate-auto-detect ip-subscriber command from Interface
Configuration or Profile Configuration mode:
host1:vr1(config)#ip re-authenticate-auto-detect ip-subscriber
Preservation of Dynamic Subscriber Interfaces with DHCP External Server Overview
on page 513
ip dhcp-external recreate-subscriber-interface
Chapter 21: Configuring the DHCP External Server Application
523