JunosE 11.2.x Broadband Access Configuration Guide
678
Access the virtual router context.
1.
host1(config)#virtual-router west400
host1:west400(config)#
Create the HTTP local server.
2.
host1:west40(config)#ip http
(Optional) Specify a standard IP access list that defines which subscribers can
3.
connect to the HTTP local server.
host1:west40(config)#ip http access-class chicagoList
(Optional) Specify the port on which the HTTP local server receives connection
4.
attempts.
host1:west40(config)#ip http port 8080
(Optional) Specify the maximum number of connections that can exist between
5.
one IP address and the HTTP local server.
host1:west40(config)#ip http same-host-limit 20
Specify the maximum time that HTTP local servers maintain connections.
6.
host1:west40(config)#ip http max-connection-time 1000
Enable the HTTP local server to listen for and process IPv4 exception packets
7.
host1:west40(config)#ip http server
Configure the HTTP redirect feature for the profile, interface, or subinterface that
8.
will be referenced in the guided entrance service definition.
host1:west40(config)#profile guidEnt6
host1:west40(config-profile)#ip http redirectUrl http://ispsite.redirect.com
To configure the HTTP local server to support guided entrance for IPv6:
Access the virtual router context.
1.
host1(config)#virtual-router west400
host1:west400(config)#
Create the HTTP local server.
2.
host1:west40(config)#ipv6 http
(Optional) Specify a standard IP access list that defines which subscribers can
3.
connect to the HTTP local server.
host1:west40(config)#ip http access-class chicagoList
(Optional) Specify the port on which the HTTP local server receives connection
4.
attempts.
host1:west40(config)#ipv6 http port 8080
Copyright © 2010, Juniper Networks, Inc.