Monitoring Duplicate Mac Addresses Use By Dhcp Local Server Clients - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

Software for e series broadband services routers broadband access configuration guide
Table of Contents

Advertisement

Related Topics

Monitoring Duplicate MAC Addresses Use By DHCP Local Server Clients

Purpose
Action
Meaning
Copyright © 2010, Juniper Networks, Inc.
Table 129: show ipv6 dhcpv6-local statistics Output Fields (continued)
Field Name
request(renew) rx
decline rx
release rx
inform rx
confirm rx
rebind rx
reconfigure tx
advertise tx
successful reply tx
failed reply tx
unknown msgs
bad msgs
show ipv6 dhcpv6-local statistics
Display duplicate MAC addresses that are being used by DHCP local server
clients.Optionally, display information for a specific duplicate MAC address.
To display information about a specific MAC address being used by multiple clients:
host1# show ip dhcp-local duplicate-clients 00-0D-61-7F-67-70
MAC
00-0D-61-7F-67-70
Interface
ATM 3/0.1
ATM 3/0.2
Table 130 on page 562 lists the show ip dhcp-local duplicate-clients command output
fields.
Chapter 22: Monitoring and Troubleshooting DHCP
Field Description
Number of DHCPv6 requests for renewal received
Number of DHCPv6 decline messages received
Number of DHCPv6 release messages received
Number of DHCPv6 information-request messages received
Number of DHCPv6 confirm messages received
Number of DHCPv6 rebind messages received
Number of DHCPv6 reconfigure messages transmitted
Number of DHCPv6 advertise messages transmitted
Number of reply messages transmitted with success reply code
Number of reply messages transmitted with reply codes other than
success
Unused field; always 0
Number of messages with errors received by the DHCPv6 local
server
Count
Time
100
Sat Sept 17, 2005 06:00:51 UTC
90
Sun Sept 18, 2005 09:00:00 UTC
561

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2

Table of Contents