Radius Attribute Descriptions; Radius Ietf Attributes; Chapter 6 Radius Attribute Descriptions; Table 49: Radius Ietf Attributes Supported By Junose Software - Juniper JUNOSE SOFTWARE 11.2.X - BROADBAND ACCESS CONFIGURATION GUIDE 7-20-2010 Configuration Manual

CHAPTER 6

RADIUS Attribute Descriptions

RADIUS IETF Attributes

Table 49: RADIUS IETF Attributes Supported by JunosE Software

Attribute
Number Attribute Name
[1] User-Name
[2] User-Password
[3] CHAP-Password
Copyright © 2010, Juniper Networks, Inc.
This chapter lists the RADIUS attributes that are supported by JunosE Software. Table
49 on page 249 describes the supported RADIUS IETF attributes. Table 50 on page 256
describes the supported Juniper Networks vendor-specific attributes (VSAs). Table 51
on page 267 describes the DSL Forum VSA formats supported by JunosE Software. Table
52 on page 268 describes RADIUS attributes that are simply passed to their destination
by the router.
RADIUS attributes are discussed in the following sections:
RADIUS IETF Attributes on page 249
Juniper Networks VSAs on page 255
DSL Forum VSAs on page 267
Pass Through RADIUS Attributes on page 268
RADIUS Attributes References on page 268
Table 49 on page 249 describes the RADIUS IETF attributes supported by JunosE Software.
The attributes are sorted by standard number.
Description
Name of user to be authenticated
Configurable username override
Password of user to be authenticated
Configurable password override
Password Authentication Protocol (PAP)
Response value provided by a Point-to-Point Protocol (PPP) Challenge Handshake
Authorization Protocol (CHAP) user in the response to an access challenge
249